Description:

Rust Eater & Converter Spray - 22 oz

Chemically removes rust and transforms it into a stable, paintable surface. Designed for tools, vehicles, boats, and metal surfaces requiring rust treatment before painting. The biodegradable formula prevents further rusting without harming the original metal.

Directions:

Surface must be free of oil, grease, loose rust, and flaking paint. Use a degreaser and light sanding or wire brushing to prepare the surface if these conditions are present. Coat the surface with Rust Eater by spraying, brushing, or dipping. For best results, use at temperatures above 70 degrees Fahrenheit or 21º C. If the surface is going to be painted, allow the treated surface to dry thoroughly for 2 hours, then apply oil based, urethane or epoxy paint. If the treated area will not be painted afterward, apply directly to surface and allow it to work for 1-2 minutes before rinsing treated area with fresh water. Towel dry surface and apply an appropriate protective oil. If a sprayer is used, pump clean water through for about 1 minute before storing.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.